Advertisements

Category Archives: iPad Jailbreak

iPad is one of the most revolutionary products that have been developed by Apple. Apart from the many officially supported apps, the device can be jailbroken to perform a lot of different functions that are not possible with the stock iPad. In this guide book we have compiled numerous tips, tricks and how to tutorials for jailbreaking the iPad that can be used by both novice and experienced users. You may want to bookmark this page for later reference. Additionally, we would highly appreciate if you can share this guide book with your friends and family.

How to Jailbreak iOS 5.0.1 Untethered With Sn0wbreeze

A massive upgrade to the Windows jailbreak tools at the 2nd anniversary of Sn0wbreeze brought huge changes in pod2g’s and iOS 5.0.1 untethered Jailbreak. Continue reading to for a full Sn0wbreeze 2.9 tutorial for iOS 5.0.1.

Steps for Sn0wbreeze 2.9 tutorial for iOS 5.0.1 are as follows:

Step 1: Run in XP compatibility mode as an administrator after downloading Sn0wbreeze 2.9 (Sn0wBreeze 2.9 , Sn0wBreeze 2.9.1)

Step 2:  Using the ‘app IPSW download tool’, browse for your IPSW firmware and download the required IPSW

Step 3: Sn0wbreeze will place custom IPSW on your desktop.

Step 4: Once custom firmware is created, press OK and put your device into DFU mode. When the device is in DFU mode click Start to enter iREB, this will put your device into PwnedDFU mode to restore custom firmware with iTunes.

Step 5:  When your device is verified in PwnedDFU, close Sn0wBreeze and open up iTunes. Through this you will recognize your device in DFU mode. Click restore while holding shift key and, then select your custom firmware that is prefixed with “Sn0wbreeze”.

Step 6: Once your device is restored, you should have a jailbroken device running iOS 5.0.1 untethered. Check for Cydia on your Home screen.

Please share your experience with Sn0wbreeze and have you benefitted through 5.0.1 support?

via iDB

Advertisements

How to Jailbreak iPad 2 and iPhone 4S with Absinthe

Recently, the untethered jailbreak for iPad 2 and iPhone 4S is released via Absinthe. For untethered Jailbreaking your iPad 2 or iPhone 4S, you have to download Absinthe first. You can follow the below mentioned steps to Jailbreak your device.

iPhone 4S Untethered Jailbreak Video

iPad 2 Untethered Jailbreak Video

How to Jailbreak the iPhone 4S or iPad 2 with Absinthe

  1. Download: First step is to download Absinthe (V0.4: Mac – Windows – Linux)on your computer, extract the file and run the file on your system.
  2. Make a Connection: Connect your iPad 2 or iPhone 4S to your computer using USB port.
  3. Jailbreak: You can now click on the “Jailbreak” to begin the process of Jailbreaking. This will run the Absinthe Jailbreak on your computer. You may notice that your iPhone 4S or iPad 2 will start restoring a backup after few minutes. You can read a message on the screen “Restoring in Progress”. The process may take a while to complete so wait patiently and do not click on any button.Jailbreak Absinthe
  4. Unlock your device: After your device completes the restoring process, unlock your device if needed. You will notice a new Absinthe icon on Home screen of your iDevice.
  5. Tap Absinthe icon: Now, you can tap on the Absinthe icon and it will lead you to the GreenPois0n site. Absinthe will than reboot the iPhone 4S or iPad 2. You may notice that Cydia will replace the Absinthe icon after your device loads back.iPhone-4S-Cydia
  6. Done. The process may take a long time than other untethered jailbreak methods, but you can easily jailbreak your device following simple steps as described in this tutorial.

After Jailbreaking your iPhone 4S and iPad 2, you can now use Cydia to download all the latest tweaks and jailbreak apps for free.

Let us know about your feedback or your experience with Jailbreaking in the comments below!!

via iDB

 

How To Jailbreak iPad 2 and iPhone 4S on Windows

Windows-CLI-Tool

With the release of latest CLI tool update by the iPhone Dev team, Jailbreaking iPhone 4S and iPad 2 become more convenient for Windows users. The added support in recent Dev team release for Windows users in CLI tool update makes things easier for Windows users. With this recent update, a Window user can use Windows command prompt to perform untethered Jailbreak on iPad 2 or iPhone 4S. The process is simple and more convenient than previous jailbreak methods.

Before starting a Jailbreak process using CLI tool, you have to download CLI tool version 0.4.3. After downloading 0.4.3 version, you have to follow simple steps as described below in the article to Jailbreak your device.

Precautions: To save yourself from problems in the process, remove all passcode protections of your device. Make sure that you have iTunes installed on your Windows PC and keep your device plugged in to your computer.  You must run CMD as an Admin.

Tutorial

  1. Download. First, download the RedSn0w CLI tool version 0.4.3 (Mac • Windows) on your Windows PC.
  2. Connect Your Device. Use USB port to connect your iPad 2 or iPhone 4S to your Computer.
  3. Command Prompt. Use administrative privileges to open command prompt on Windows. Access the download directory through command prompt (cinject_0.4.3 folder). Every user must navigate to the folder where the user extracted the file on their computer.Run-CMD-as-administrator
  4. Execute commands. After completing the 3rd Step, now you have to execute following commands to continue with the process.

cinject -i payloads/jailbreak.mobileconfig

cinject-cli-01

  1. Install. The window will appear with Install profile option on your iPad 2 or iPhone 4S. Click on the install option so that your device can accept the new profile. Keep typing new commands on your command prompt.

cinject -j payloads
cinject -wInstall-Profile

  1. Go to Settings > Network > VPN on your iDevice.
  2. VPN Settings. Turn on the VPN Settings by toggling it. You may receive a message on your device “A configuration error occurred” but this is normal. It may take some time in loading before completing the process.A-configuration-error-occurred
  3. Reboot. Your device will automatically reboot after few seconds. Again, you may find some errors on your screen while rebooting but this is normal with this process.iPhone-4S-Jailbreak-Reboot
  4. Done. As soon as you see the following message on your screen, unlock your iDevice to access Cydia on your home screen.

Feb 21 08:44:46 iPhone cleanup[208] : Removing WebClip
Feb 21 08:44:46 iPhone jb[195] : 2012-01-21 08:44:46.473 cleanup[208:707
] Removing WebClip
Feb 21 08:44:46 iPhone jailbreak[195]: Installing filemover…

Additional Tips:

  • If you incur “Send1: Response too large” error, try unplugging the USB cable and plugging it back in.
  • Jailbreak might run very slow or even fail if your device is filled with large amount of content. In such case we will recommend you to backup and restore your device to clean install of iOS 5.0/5.0.1 and then go for Jailbreaking using this guide.

This will complete your Jailbreaking process using the latest update of CLI from the Dev Team. Let us know about your feedback about the tutorial in the comments below!

via iDB

How to Permanently Preserve Your iOS 5.0.1 Untethered Jailbreak

It is important that you pay heed to Apple’s warning against Jailbreaking and permanently preserve your iOS 5.0.1 untethered Jailbreak to counter any future move from Apple. It is very important that you update to iOS 5.0.1 and save SHSH blobs across all devices including iPad 2 and iPhones 4S. This will allow you to downgrade to iOS 5.0.1 later and secure your access to untethered Jailbreak forever.

Now, we will guide you to create a firmware file for your A4 devices that can always be Jailbroken.  Further we will also guide you to preserve the ability to Jailbreak on A5 devices as well.

Step 1: Download the latest version of TinyUmbrella and RedSn0w (0.9.10 beta 5: Mac • Windows).

Step 2: Connect the computer to your iDevice.

Step 3: Using the settings mentioned above in the video, open TinyUmbrella and save your 5.0.1 SHSH blobs. Note: This has to be done fast before Apple update to 5.1 because it is still signing the iOS 5.0.1 firmware. If you saved blobs at Cydia’s server then you can also retrieve it from there.

Step 4: Open RedSn0w and go to Extras > SHSH blobs > Stitch and then point to  iOS 5.0.1 firmware for your device, and then select the 5.0.1 SHSH blob. After that RedSn0w will stitch them together. Note: This step only applies to A4 devices like the iPad 1 or iPhone 4.

Step 5: Now save the newly created IPSW file to a safe location. In this way you will always be able to downgrade to iOS 5.0.1 when Apple is no longer singing the firmware.

About Stitching: To protect your iOS 5.0.1 untethered jailbreak, it is not necessary to create a stitched IPSW+SHSH blobs. All you need to do is save both the firmware for iOS 5.0.1 along with the SHSH blob in a safe location. Once when you get the bootrom level exploit for A5 devices, you can go back and stitch them together.

Then you can restore through stitched IPSW file by utilizing PwnedDFU mode and the custom IPSW option in RedSn0w.

What are you waiting for? Protect your Jailbreak now. Those, who are facing problems on Windows with the error: The blobs could not be verified. Try the following:

Win 7: 64bit
Close redsnow.

Go to:
C:Program Files (x86)Common FilesAppleApple Application Support

Copy all the files!

Paste it here:
C:Users[user]AppDataRoamingredsn0w

via iDB

How to Jailbreak the iPhone 4S and iPad 2 on Linux with Absinthe

With the release of Linux version of Absinthe all platform can access tools to Jailbreak their iPhone 4S and iPad 2. Recently, we have already covered article to Jailbreak iPhone and iPad with Absinthe on OS X and Windows. But still we do not want to put our Linux reader aloft. Despite the lack of iTunes, it is easy to apply an untethered Jailbreak with Absinthe on Linux.


Step 1: Libimobile device package allows Linux to communicate with your iPhones 4S, iPad 2 and other iOS devices. You need to install it on your Linux distribution with the following steps:

  • Type: “sudo add-apt-repository ppa:pmcenery/ppa” at the terminal
  •  If you received ay warning on the way accept them and install the package.
  • Next Type: “sudo apt-get update”
  • Go for Ubuntu software centre and look for Livemobiledevice and install Livemobiledevice-utils. Reboot your device and Linux will be able to recognize it.
  • Absinthe Jailbreak LinuxAbsinthe Jailbreak Linux

It varies with Linux distribution, so if you have different Linux distribution then take it as a loose guide and visit http://www.libimobiledevice.org/ for more information.

Step 2: Download Absinthe v0.3 for Linux.

Step 3: If you have 64 bit, x86 machine then double click on Absinthe x86_64 to run.

Absinthe Jailbreak Linux

Step 4: Absinthe will detect your device when you switch it ON, now click Jailbreak to start the magic.

Absinthe Jailbreak Linux

Step 5: Until the loading bar is complete, do not press any button, no intervention is needed here. Once it gets completed, find Absinthe icon at the home page of your device and then launch it to complete the Jailbreak.

Absinthe Jailbreak Linux

Step 6: Once your device reboots, you will see a Cydia icon on your desktop.

If you are a Linux user, then share your experience and comment for Jailbreaking iOS with Absinthe. We are eager to listen from your side.

via iDB

How to Jailbreak the iPhone 4S and iPad 2 Untethered With Absinthe

Through the instructions in this article, we will educate you the entire process of untethered Jailbreak of iPhone 4S and  iPad 2 with Absinthe.

iPhone 4S Untethered Jailbreak Video

iPad 2 Untethered Jailbreak Video

See !! How you can Jailbreak the iPhone 4S or iPad 2 with Absinthe ?

Step 1: Download, extract, and run Absinthe (V 0.3: Mac – Windows – Linux)

Step 2: Connect your iPad 2 or  iPhone 4S via USB data cable.

Step 3: Hit the  “Jailbreak” button to execute the Absinthe Jailbreak. It will take a few minutes in starting, and then your iPad 2 or iPhone 4S will start to restore its backup. This step is known as “Restoring in Progress”. It’s a bit more lengthy process, seems like the system hanged but don’t bother about it. Do not touch the device and let it finish completely.

Absinthe Untethered Jailbreak

Step 4: Once the process of restoring is complete, you will get an icon of Absinthe at your screen. Tap the Absinthe icon and load the GreenPois0n site, when the backup is completereboot your device. Now you will see that the Absinthe icon is replaced with Cydia icon.

Absinthe Untethered Jailbreak

Step 5: Now your iPad 2 or iPhone 4S is Jailbroken. You can start downloading your favorite tweaks and Jailbreak apps.

via iDB

How to Jailbreak Your iPad 1 Using PwnageTool (Mac)

If you are still waiting to Jailbreak your iPad 1, follow the instruction on “ how to jailbreak your iPad 1 on iOS 5.0.1″ using PwnageTool for Mac in this article.

Step One

Create a folder entitled “Pwnage” on the desktop and fill it with a couple of things like;

1. PwnageTool 5.0.1.
2  5.0.1 iPad firmware which can be downloaded as follows;

It is good, if you are downloading IPSW file with Firefox since safari auto extract it.

iPad 1 Jailbreak with Pwnage Tool

Step Two

After double click on PwnageTool, drag the PwanageTool icon to the Pwanage folder.

iPad 1 Jailbreak with Pwnage ToolNow inside Pwanage folder, double click the PwanageTool to launch the application.

iPad 1 Jailbreak with Pwnage ToolIf warning occurs then hit the OK buttoniPad 1 Jailbreak with Pwnage Tool

Step Three

Select the appropriate Expert Mode from the top menu bar

iPad 1 Jailbreak with Pwnage Tool

Step Four

Screen with the iPad’s will popup. Select your appropriate iPad. As you click on the selected iPad, a green color check mark will appear on that iPad. Press the blue arrow button at the end of the screen to continue.iPad 1 Jailbreak with Pwnage Tool

Step Five
You will be brought to the “Browse for IPSW” page. Click the Browse for IPSW…button.

iPad 1 Jailbreak with Pwnage Tool

Now popup window will show you a set of firmware. Select your firmware and then press Open button in Pwnage folder.

iPad 1 Jailbreak with Pwnage Tool

Step Six

Now you will find a screen, showing you different choices, select the General and hit the Next arrow button at the end to continue.

iPad 1 Jailbreak with Pwnage Tool

Through General setting you will be able to decide the partition size..

iPad 1 Jailbreak with Pwnage Tool

You do not need to install custom packages manually, Cydia setting menu allows it to install it automatically.

iPad 1 Jailbreak with Pwnage Tool

Press the Refresh button to see all the available list of download packages. For downloading double click at the desired package and then hit the next arrow button to continue.

iPad 1 Jailbreak with Pwnage Tool

Check the packages that you want and then hit the Next arrow button.

iPad 1 Jailbreak with Pwnage Tool

Now the window will shows the Custom Package Setting for your custom IPSW. Here packages can be enabled or disabled.

iPad 1 Jailbreak with Pwnage Tool

Step Seven

The Pwnage process starts here. You can now adjust the setting of each section, once you have finished click “Build” to compile and build the IPSW file that will be used to restore the iPad and apple TV 2G. When you done with the Build button hit Next to continue.

 

iPad 1 Jailbreak with Pwnage ToolStep Eight

Now save the custom IPSW file to the Pwnage folder that you created at the desktop.

iPad 1 Jailbreak with Pwnage ToolIt starts to building the IPSW file, wait for 10 minutes. Later this can be used to restore your iPad , apple TV 2G.

iPad 1 Jailbreak with Pwnage Tool

Enter your administrative user name and password and then hit the OK button.

Step Nine

On building your IPSW, You need to connect your iPad with computer. Then computer will detect your device and Pwnage tool will guide you step by step to put your iPad in DFU mode.

iPad 1 Jailbreak with Pwnage ToolHold the power and home buttons for 10 seconds.

iPad 1 Jailbreak with Pwnage ToolNow continue holding the home button and release the power button for 10 seconds. This will help iPad to enter in DFU mode
iPad 1 Jailbreak with Pwnage Tool

Now you will see a window congratulating you to enter in DFU mode, Press the OK button. Now PwanageTool will prompt you to launch iTunes.
iPad 1 Jailbreak with Pwnage Tool

Step Ten

If you are experiencing problem with your iPad, you can restore its original settings by clicking restore by holding Alt/Option key.

iPad 1 Jailbreak with Pwnage Tool

 

Step Eleven
Using the dialog window that appears on your desktop select the Pwnage folder. Select the custom IPSW and click on the Choose button.

iPad 1 Jailbreak with Pwnage Tool

Step Twelve

This is also a 10 minute process. iTunes will start to restore on your iPad and when its done then reboot into Jailbroken iOS 5.0.1

via iClarified

How to Perform Untethered Jailbreak of iPhone 4, 3GS, iPad 1 and iPod Touch on iOS 5.0.1 [Windows]

The wait is finally over and iPhone Dev-Team has released the untether jailbreak solution for iPhone 4, 3GS, iPad 1 and iPod Touch. In this article we will explain how to perform untethered jailbreak of iPhone 4, 3GS, iPad 1 and iPod Touch on 5.0.1 using RedSnow for Windows. The Mac version of this tutorial is here.

If you have already jailbroken your iOS 5.0.1 firmware using a tethered method, you can upgrade to the untethered jailbreak using Corona Unether jailbreak tweak.

The procedure described in this article will force you to upgrade your baseband potentially ruining your chances for an unlock. If you want to jailbreak iOS 5.0.1 but want to preserve your baseband, you should follow a different tutorial provided here.

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

How to Perform Untethered Jailbreak of iPhone 4, 3GS, iPad 1 and iPod Touch on iOS 5.0.1 [Windows]

Step One

Create a folder on your desktop and name it as “Pwnage”. You would need to put a couple of things in this folder.

Download the latest version of RedSn0w from here and place it in the Pwnage folder. Similarly, download iOS 5.0.1 firmware from the links provided below and place it in the Pwnage folder as well. If you are already on iOS 5.0.1 you do not have to download and place iOS 5.0.1 in the Pwnage folder.

Double click the the RedSn0w zip file to extract it.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

Step Two:

People who are already on iOS 5.0.1, should skip this step

  • Connect your iPhone to the computer and launch iTunes.
  • Select your iPhone from the list of devices on the left.
  • Hold down Option and click the Restore button.
  • We prefer Restore it does not waste any space on your iPhone.

Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

  • Navigate to the Pwnage folder on your desktop that you created earlier and select the 5.0.1 firmware IPSW file.
  • Select the IPSW file and Click the Open button to continue.

Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

iTunes will now update your iPhone to the new firmware. This step will take some time so you need to be patient.

Step Three
Launch the RedSn0w application from the RedSn0w folder that we extracted earlier. Windows 7 users may prefer running as an administrator in Windows Vista compatibility mode. In order to do this you would have to right click on the executable and select Properties from the contextual menu.

Step Four
Once RedSn0w opens up, a window would be displayed. Click the Jailbreak button.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

Step Five
Connect your iPhone with the computer, but make sure that your iPhone is off. Then click on theNext button.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

Step Six
RedSn0w will now take over and will guide you through the steps to get into DFU mode. If you need more help with DFU mode, you can read our tutorial here.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

Press and hold the power and home buttons for 10 seconds.
http://techow.net/how-to-put-your-iphone-or-ipad-into-dfu-mode

Release the Power button and continue holding the Home button until RedSn0w detects the device.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

Step Seven
Your iPhone should now reboot.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

Step Eight
RedSn0w will now prepare the jailbreak data.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

Step Nine
Select Cydia from the list of options and click Next.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

Step Ten
Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

Step Eleven
Once RedSn0w uploads the new RAM Disk and Kernal, you will be notified that RedSn0w is done. When your iPhone reboots in about 5 minutes or so your iPhone will be jailbroken with Cydia on the SpringBoard.
Untethered Jailbreak of iPhone 4 on iOS 5.0.1 [Windows]

That’s all, you are done with an untethered jailbreak of your iPhone 4, iPhone 3GS, iPod Touch and iPad 1.

Do let us know about your experience with the jailbreak in the comments below.

How to Perform Untethered Jailbreak of iPhone 4, 3GS, iPad 1 and iPod Touch on iOS 5.0.1 [Mac]

The wait is finally over and iPhone Dev-Team has released the untether jailbreak solution for iPhone 4, 3GS, iPad 1 and iPod Touch. In this article we will explain how to perform untethered jailbreak of iPhone 4, 3GS, iPad 1 and iPod Touch on 5.0.1 using RedSnow for Mac. The Windows version of this tutorial here.

If you have already jailbroken your iOS 5.0.1 firmware using a tethered method, you can upgrade to the untethered jailbreak using Corona Unether jailbreak tweak.

The procedure described in this article will force you to upgrade your baseband potentially ruining your chances for an unlock. If you want to jailbreak iOS 5.0.1 but want to preserve your baseband, you should follow a different tutorial provided here.

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

How to Perform Untethered Jailbreak of iPhone 4, 3GS, iPad 1 and iPod Touch on iOS 5.0.1 [Mac]

Step One
Create a folder on your desktop and name it as “Pwnage”. You would need to put a couple of things in this folder.

Download the latest version of RedSn0w from here and place it in the Pwnage folder. Similarly, download iOS 5.0.1 firmware from the links provided below and place it in the Pwnage folder as well. If you are already on iOS 5.0.1 you do not have to download and place iOS 5.0.1 in the Pwnage folder.

Double click the the RedSn0w zip file to extract it.
Untethered Jailbreak On iOS 5.0.1 [Mac]

Step Two

People who are already on iOS 5.0.1, should skip this step

  • Connect your iPhone to the computer and launch iTunes.
  • Select your iPhone from the list of devices on the left.
  • Hold down Option and click the Restore button.
  • We prefer Restore it does not waste any space on your iPhone.

Untethered Jailbreak On iOS 5.0.1 [Mac]

  • Navigate to the Pwnage folder on your desktop that you created earlier and select the 5.0.1 firmware IPSW file.
  • Select the IPSW file and Click the Open button to continue.

Untethered Jailbreak On iOS 5.0.1 [Mac]

iTunes will now update your iPhone to the new firmware. This step will take some time so you need to be patient.

Step Three
Launch the RedSn0w application from the RedSn0w folder that we extracted earlier.

Step Four

Once RedSn0w opens up, a window would be displayed. Click the Jailbreak button
Untethered Jailbreak On iOS 5.0.1 [Mac]

Step Five
Connect your iPhone with the computer, but make sure that your iPhone is off. Then click on the Next button.
Untethered Jailbreak On iOS 5.0.1 [Mac]

Step Six
RedSn0w will now take over and will guide you through the steps to get into DFU mode. If you need more help with DFU mode, you can read our tutorial here.
Untethered Jailbreak On iOS 5.0.1 [Mac]

Press and hold the power and home buttons for 10 seconds.
Untethered Jailbreak On iOS 5.0.1 [Mac]

Release the Power button but continue holding the Home button until RedSn0w detects the device.
Untethered Jailbreak On iOS 5.0.1 [Mac]

Step Seven
Your iPhone should now reboot
Untethered Jailbreak On iOS 5.0.1 [Mac]

Step Eight
RedSn0w will now prepare the jailbreak data.
Untethered Jailbreak On iOS 5.0.1 [Mac]

Step Nine
Select Cydia from the list of options and click Next.
Untethered Jailbreak On iOS 5.0.1 [Mac]

Step Ten
Your iPhone will now be rebooted again and RedSn0w will begin uploading the new RAM Disk and Kernel.
Untethered Jailbreak On iOS 5.0.1 [Mac]

Step Eleven
Once RedSn0w uploads the new RAM Disk and Kernal, you will be notified that RedSn0w is done. When your iPhone reboots in about 5 minutes or so your iPhone will be jailbroken with Cydia on the SpringBoard.
Untethered Jailbreak On iOS 5.0.1 [Mac]

That’s all, you are done with an untethered jailbreak of your iPhone 4, iPhone 3GS, iPod Touch and iPad 1.

Do let us know about your experience with the jailbreak in the comments below.

How To Convert Tethered iOS 5.0.1 Jailbreak To Untethered Jailbreak Using Corona Untether

We have just got a new version of Redsn0w 0.9.10b1 that enables untethered jailbreak of iPhone 4, iPhone 3GS, iPod touch 4G, iPod touch 3G and iPad 1. We now also have a new jailbreak tweak called Corona iOS 5.0.1 Untether. Corona iOS 5.0.1 Untether allows users who have already jailbroken their iPhone 4, iPhone 3GS, iPod touch 4G, iPod touch 3G, iPad 1 on iOS 5.0.1 using tethered or semi-tethered solutions to upgrade to an untethered jailbreak. This enables users to avoid a computer each time they need a reboot.

Chronic dev team has provided the following information about the Corona iOS 5.0.1 Untether jailbreak app:

this package will allow your 5.0.1 device to install pod2g’s untethered exploits and reboot without requiring an external tool like redsn0w or sn0wbreeze, and without having to restore your device (so you get to keep all your apps, contacts, etc).

How To Convert Tethered iOS 5.0.1 Jailbreak To Untethered Jailbreak Using Corona Untether

Provided below is a step by step guide to convert your tethered iOS 5.0.1 into an untethered jailbreak. As the name suggests Corona iOS 5.0.1 Untether only works on iOS 5.0.1.

ios-5.0.1-untether jailbreak

  • Launch Cydia
  • Tap on the Search tab
  • Search for Corona iOS 5.0.1 Untether
  • Select Corona iOS 5.0.1 Untether from the search results
  • Tap on the Install button to install it.
  • Finally tap on the Confirm button.

That’s it, you are all done and can now safely reboot your iOS device.

If you haven’t jailbroken your iOS device then you need to use Redsn0w 0.9.10b1 released by the iPhone Dev team. You can checkout our step by step guides to perform untethered iOS 5.0.1 jailbreak using Redsn0w.

Do let us know about how it goes by commenting below and lastly do not forget to give a donation to pod2G for all his hard work.

%d bloggers like this: